I ordered the OHR WM-2 Wattmeter Kit to support my growing interest in QRP operation. It is a nice kit to build using quality components, enabling the builder to make a really useful piece of equipment. Designed specifically for QRP usage, it operates from 300 KHz – 54 MHz and measures forward and reflected power at QRP…
Kits we’ve built, and how we went about it,
Spectrum Communications 4m Transverter
This kit is the Spectrum Communications TRC4-10sl 4m Transverter, designed to transvert a 10m (28MHz) signal to 4m (70MHz). It has an output of approximately 25W due to the inclusion of a separate PA board and a maximum input of 5W. Minimum input is 500mW. This is a really nice kit to build using quality components…
CWTouchKeyer’s P3K Touchkey (Kit Build)
This is an interesting project for the CW enthusiast and home constructor. Bought from CWTouchKeyer in the USA, the P3K is a Touchkey kit that is supplied as a small PCB plus the appropriate components. There are lots of other versions available, too. The kit is constructed and has to be installed into a small…
The ZM-2 Emtech Antenna Tuning Unit
I ordered this kit from the USA to go with my YouKits HB-1B QRP CW Transceiver. It has a good reputation for tuning both unbalanced and balanced antennas and has appropriate connections for both. The ZM-2 can be built with either BNC or SO-239 sockets. I ordered mine with BNC, as these seem to be…
⚠️ IMPORTANT: You've been redirected to our new website.
- Please update your address books (etc) to this page's address: https://fparc.uk/
- Our previous website's address and old email addresses (…@fparc.org.uk) are no longer in use. Thank you!